12 mm BATH EDGING QUADRANT BEADING SEALING KIT READY MITRED SPECIAL SIZES CUT TO ORDER WATER RUNS BACK IN TO THE BATH NOT DOWN THE WALL

Product Information

Clean and dry – Use warm water containing a mild detergent to thoroughly remove grime and residue from the area and then use paper towels or a hairdryer to speed up the drying process. The Fugi, produced by Cramer (pictured below), features cut outs of various sizes which produce different bead thicknesses. The water in the bath acts as a weight (most baths settle slightly when filled due to the movement in flooring) and ensures that the silicone sealant will not stretch or tear when the tub is filled at bath time and the weight of a human is added.

Room H2O appreciates that DIY is not everyone’s cup of tea and there are some jobs you would rather leave to the professionals. Choose the correct type of silicone sealant that is compatible with your chosen wall or floor coverings (such as natural stone, porcelain tiles or ceramic tiles). Check the shower tray and walls are completely dry and free from dirt, dust, grease and debris or the silicone sealant will not adhere correctly.A sharp knife will be required for opening the silicone sealant and trimming the application nozzle to size.

Wondering how to seal a shower tray or looking for top DIY tips on how best to apply silicone sealant? If using a tool to smooth the silicone sealant, select the correct aperture size to produce a bead that will fully cover the gap between the shower tray and tiles. Thoroughly dry the shower tray area with paper towel or allow the shower tray to air dry for a couple of hours before applying the silicone sealant, which will not adhere properly should any moisture remain. We know that not everyone has the luxury of a freestanding bath and that many modern bathroom designs will incorporate over-bath showers that also require sealing. If you cannot find the information that you require please leave a post in the DIY Forum as one of the many Forum members may be able to help.

Use gentle pressure to the trigger of the application gun and work towards the front of the shower tray in one continuous, smooth action to ensure application of a uniform silicone bead.

While this is suitable for use with silicone sealant and caulking, similar good quality tools can be purchased from tile retailers and good DIY outlets. Usually, fresh silicone should be left to dry or cure for a minimum of 24 hours, although this depends on the brand and type of sealant. The nozzle of the silicone sealant tube will usually feature perforated marks to indicate where and how to trim the nozzle but a good rule of thumb is to cut at a 45-degree angle and create a 5-6mm hole in the end of the tube, which can be enlarged if a wider bead is required.

Here are some handy tips to set you on the right path and make sure you apply silicone sealant correctly to achieve a professional finish and prevent water leaks.

This section has hundreds of instructional videos showing how to do the easiest of DIY related jobs right up to a full bathroom refurbishment. One of the most common causes of water leaks from shower trays, shower enclosures and baths is the poor application of silicone sealant. It should specify that it is suitable for use in bathrooms / wetrooms and contain an anti-mould and bacterial additives such as Kerakoll Fugabella Eco Silicone Sealant or Kerakoll Fugabella AM Silicone Sealant, which are both available from our sister company UK Tiles Direct. Made from rubber and designed to remove excess sealant, these handy tools will help you achieve a neat bead of silicone when sealing a shower tray.Remove loose deposits and surface dust with a vacuum then, with a damp cloth that has been soaked in a mixture of warm water and mild detergent to remove any stubborn deposits, thoroughly clean and dry the area where the silicone sealant will be applied (the shower tray surface and tiles). Once a smooth, uniform bead has been achieved around the shower tray, do not be tempted to keep smoothing the silicone as it will start to tear, look untidy and may not adhere correctly. Seal that shower – Follow our shower tray sealing tips above for hassle-free shower sealing with a smooth, neat finish. Residual pressure can remain in the tube causing silicone sealant to leak from the nozzle so take care!