Cuprinol UTDSSB25L Anti Slip Decking Stain Silver Birch 2.5 Litre

Product Information

To maintain the surface finish and its anti-slip properties, re-apply a fresh coat of Cuprinol Anti-Slip Decking Stain when the surface starts to show signs of wear, following the Preparation and Application instructions above. It also features algicide which helps protect your wooden surface against green algae and mould growth. It has a unique double action formulation which has invisible anti-slip microbeads to make decks safer than untreated wood and an algicide to help protect the film surface from green algae and mould growth. Before full application of cuprinol decking stain, we always recommend testing out a small area on your decking surface to ensure you are happy with the products overall adhesion and finish.

It has a unique double action formulation which has invisible anti-slip microbeads to make decks safer than untreated wood and a fungicide to help protect the film surface from mould growth.Remove any algae, lichen, fungi or moss using an appropriate fungicidal wash such as Cuprinol Decking Cleaner.

If you come across any holes or gaps on your wooden surface, these should also be filled in before starting.It is also important to note that overall final colour will depend on wood type, previous treatments and the number of coats that have been applied. To maintain the overall finish and its anti-slip properties of cuprinol decking stain, re-apply a fresh coat of Cuprinol Anti-Slip Decking Stain when the surface starts to show signs of wear. Before application ensure that your decking area has been swept thoroughly and all dirt and debris has been removed. For optimum results, do not apply Cuprinol decking stain in temperatures below 5ºC or in damp conditions.

Ensure decked areas are swept with a stiff brush or broom to remove all surface dirt, debris and other surface contaminates.

To begin, stir the decking stain thoroughly, and then apply 2-3 coats evenly along the grain, avoiding any overlaps where possible. Do not apply in temperatures below 5℃, in damp conditions or if rain is likely before the product has dried. On decking previously stained with Cuprinol Anti-Slip Decking Stain, use a wire brush to remove any loose or peeling material and remove any surface contaminates as mentioned above. Decking that has already been previously coated with paint or decking stain must be stripped back to its natural bare wood before application can begin. Available in a range of Cuprinol Decking Stain colours, this hard wearing product is not only suitable to use on decking and decking steps, but is also perfect for use in larger commercial decking areas.