LEGO Technic Space Shuttle 8480

Product Information

The build actually begins with the construction of the Hubble Telescope, arguably one of the most important scientific instruments ever created by man, and it is a stunning rendition. Perhaps it’s the building techniques utilised, or maybe it’s the subject matter itself, but everything about the model feels like it has a very precise and measured design. From the offset Technic pins used for the telescope’s angled stand to the intricate design created by the yellow 1×1 tap pieces, every stage creates the feeling of building a scientific instrument.

Lego offers set with new space shuttle Discovery and - CNN Lego offers set with new space shuttle Discovery and - CNN

Five shuttles flew into space during the program’s history: Atlantis, Challenger, Columbia, Discovery and Endeavour. Challenger and Columbia were destroyed in accidents. In excess of 1,500 additional pieces means the designers have been able to include even more accurate detailing and authenticity than ever before, but it wasn’t easy – as the interview with LEGO designer Milan Madge contained within the manual attests to. Several design features of the Shuttle proved to be a real headache, such as the retractable landing gear, and the interview does a great job in explaining how the design team overcame these hurdles, as well as building anticipation for the model to come. Another option is letting both clutch gears activate the same drivetrain. Using different sized gears behind the clutch gear, you can create a gearbox, driving the drivetrain in different speeds, while the source stays the same speed. This system is utilized in the 8880-1 Technic Super Car. You can also activate the same drivetrain, but in a different direction. I don't know when this was used first, but I have seen it in the 42042-1 Crawler Crane and 42082-1 Rough Terrain Crane in recent sets. There are probably more. The front and rear gears are connected to one another through a large sub-assembly that runs the entire length of the hull. Pushing into the rear of the Shuttle will cause the landing gear to retract with a beautifully smooth motion. It may have been one of the hardest things to get right, but the designers can be proud of the finished result. NOTE: This review was written before the release of the 10283-1 NASA Discovery Space Shuttle. Contents: IntroductionThere are 3 parts that play a key role here: 6542a Technic Gear 16 Tooth with Clutch, 6538b Technic Axle Connector Ridged and 6539 Technic Driving Ring 2L. The clutch gears have a round hole instead of an axle hole, so they can spin freely over an axle. When the axle is spinning, the clutch gears don't. The driving ring can slide over the axle connector, 'catching/clutching' one of the clutch gears, making it spin along with the axle, activating any drivetrain that is connected to the clutch gear. This way, you can turn drivetrains on and off, depending on which function you want to use. There's always Engino's Eiffel Tower too which is a little smaller than the Space Shuttle but still a complex architectural piece.

LEGO Inventory for 8480-1 Space Shuttle | Brickset LEGO Inventory for 8480-1 Space Shuttle | Brickset

Besides being the largest set I've ever built at the time, there were a couple of other things in this set that were a first for me. FOS The building experience is a little hit and miss, though. The build for Hubble is simply joyous from start to finish, while the Space Shuttle starts off strong, but towards the end gets a little repetitive. It’s a minor negative as the finished model looks excellent, but it’s worth bearing in mind if you are on the fence about this set, or are deciding between this and another in a similar price range. One highlight of 10283 NASA Space Shuttle Discovery is the amount of information crammed into the manual. At almost every stage there are fascinating tidbits focusing on different aspects of the Shuttle’s construction, history and flight details, and before the build even commences there’s a beautiful double spread filled with photography and facts.

Specifications

It's hard to believe there once was a time, where we didn't have gear shifters. These are now so common-place in the Technic universe, that many sets wouldn't be possible without them. The Space Shuttle is the 2nd set to feature this system, after the 8880-1 Technic Super Car (next Classic Review?). In fact, it’s such a wonderful design that had the LEGO Group decided to release this separately, it would no doubt garner huge praise. As it is, this is just a small part of this set, and the fact there is a gigantic Space Shuttle to build next makes for a very exciting prospect. NASA Space Shuttle Discovery is a beautifully fitting tribute to mark the anniversary of the Space Shuttle’s first flight and immortalise one of the most significant moments in space exploration, the launch of the Hubble telescope. For space fans this comes highly, highly recommended. But if space travel isn’t quite your cup of tea, there are other sets out there at the moment that will offer a more enjoyable all-round experience for either the same price, or slightly cheaper.

Manual Lego set 8480 Technic Space shuttle - Manuals - Manuall Manual Lego set 8480 Technic Space shuttle - Manuals - Manuall

Sullivan flew on three space shuttle missions and was the first American woman to complete a spacewalk as part of STS 41-G with the space shuttle Challenger on October 11, 1984. This set was one which features a fiber optic system. The motors power the bay doors, the robot arm and the satellite. The arm can turn and bend and the satellite solar panels can open and close. The fibre optic system is used to light up the engines. The shuttle also has hand-operated landing gear and flaps. The alternate model is a submarine. The technology used in this set was and is currently advanced for LEGO. However, LEGO stopped marketing and stopped using Light-Fibre Technology and only uses gears and motors in their modern TECHNIC sets.I've added another gif to the Build section, which shows the FOS system working in the Space Shuttle. Gear Shifters If I ever really get into financial problems, and need to sell everything to keep a roof over my head, this one stays. I rather sleep in an alley with this set next to me, than having a house without my space shuttle. Engino also offers the London Eye in this range with a motorized engine. It's pricier but it looks suitably captivating for fans of London tourist locations. One of the most noteworthy of the new parts is the Fiber Optics Element. According to multiple blogs, this element was so expensive to produce, LEGO lost money with every set the part came in. I can't find any proof of this, but knowing what the next years would bring (AKA the Dark Ages) makes me believe there can be some truth in it. Also, the system only appeared in a few sets in the span of 2 years.

Space Shuttle review | Live Science Engino Challenger Space Shuttle review | Live Science

It's mostly very enjoyable to assemble, despite those app quibbles. It's only really the end sequence that becomes frustrating, but it's worth it when you're so close to the finish line. If you're a big space fan, you'll particularly appreciate this. However, anyone who fancies something different from the usual Lego way of doing things will like what's here. Other sets to consider The focus is clearly on the functions and outline of the shape. The signature contours are combined with only hatched areas (wings, ribbed hatches), no panels in this time. We’ve been to known to criticise the LEGO Group for how some of its products are priced, and what you actually get for that price (did someone say VIDIYO?), but to give credit where its due, the value here speaks for itself. The set contains over 2,300 pieces and will take you the best part of six to seven hours (if not more) to finish, which already makes it a good return. If the LEGO Group had sold both models separately, they would have been fantastic sets in their own right, so to have both in one makes the deal seem otherworldly. (Okay, maybe not that good, but you get the point.) — Pictures —

More about this manual

This set. This one. This is the single greatest set LEGO has ever released! What can I say. It just has everything. Especially great personal memories, what might play a role in naming this the best set ever. These two sub-assemblies connect at a slight angle, which is achieved in a rather unique way. Hinge plates are used at one end, but in the middle a 2×3 plate with hole connects to a 1×2 jumper plate. This allows for the angle of the 2×3 plate with hole to be adjusted, facilitating its attachment to the main assembly at an offset angle. Thanks for this heartfelt review, which brought me to buy this set when I found a good used bargain (I had been considering the 8480 for a while). After the build I spent some time thinking about reasons for the extraordinary appeal of this set even among today's Technic flagship models. In essence, I think it is its combination of simplicity in shape and complexity in function: