Strong Heavy Duty Plastic Kitchen Plinth Clips Kick Board Clips with Attaching Bracket - Pack of 10 - Requires 2 x 3.5mm Diameter Countersunk Screws per Bracket - For Use From Installation Height of 80 mm - Manufactured in UK - Basics UK TM

Product Information

Storage & organisation Furniture Textiles Kitchenware & tableware Kitchens Lighting Decoration Rugs, mats & flooring Beds & mattresses Baby & children Smart home Bathroom products Laundry & cleaning Plants & plant pots Home electronics Home improvement Outdoor living Food & beverages Christmas Shop Shop by room I personally marked about half way (about 6cm from the bottom lip) on each of the straight lines I'd created. However, plastic replacements are cheap as chips online. But I'll still show you how they work. Separating Kitchen Plinth Clips It's been quite a few months since fitting kitchen plinths in our utility space. And to be honest, the only reason I've not shared it until now is that the end panel (above) needed correcting.

I placed masking tape roughly where I knew I'd need to cut. This helps my pencil marks more visible and prevents chipping. I think it's best to just get an idea of where your eyes look at initially when you walk in to your kitchen. Masking Tape & Marking a Kitchen Plinth TrimAfter my main kitchen cupboard plinth was in place, it gave me a new starting point for my last bit. This was so I could continue joining kitchen plinths together. My clips came attached to the mounting plates. So, you may find you need to fold them over and snap to separate. Where to Place Kitchen Plinth Mounting Plates

I love simple jobs like these that instantly transform a space. If you wanted to, you could also fit some kitchen plinth lights. But with this being a utility space, we didn't feel they were necessary.So, on every leg, I measured the height and also jogged down how far apart they were from each other.

For this longer cut, I took it outside for some ventilation as it is an MDF wooden plinth. If you're not aware, MDF dust is very dangerous for the lungs.

Similar products

And also, with this cut being directly under the kitchen units, you shouldn't be able to see it. Another important thing to note is that my cut edge will not be sat directly on the floor with it being a timber plinth. And as my drill bits were all a bit long, I drilled through a slim off cut first before making my proper holes.